200-301 V1 Ch18: Routing in LANs

As with all the Config Labs with “BIG” in the title, this lab is different than most. This BIG lab collects many of the configuration topics in Volume 1, Part 5 of the CCNA Official [...]

Layer 3 switches, SVIs, routed ports, and L3 EtherChannels. Those topics alone make this lab fairly advanced for CCNA prep. Today’s lab focuses on the L3 EtherChannel, but also gives you a chance [...]

Layer 3 switches, aka multilayer switches, route packets using the same logic as IP routers. For ports connected to another layer 3 switch or a router, the layer 3 switch benefits from using that [...]

Layer 3 switches, aka multilayer switches, route packets using the same logic as IP routers. A layer 3 switch can simultaneously support layer 2 features such as LAN switching and VLANs. To route [...]

This next lab is one of the longer labs in this config lab series. The lab includes some simple tasks to configure 802.1Q trunking and to create VLANs. The big focus of the lab however is to [...]

This next lab asks you to enable layer 3 switching in a couple of distribution layer switches. This lab is pretty far reaching as well, asking for some VLAN trunking configuration and VLAN [...]

#ROAS can be one of those topics that seemed to be clear when you read about it, but when you see a sample test question, you just sit there and scratch your head wondering exactly what to do. [...]

ROAS is on the new ICND1 and CCNA exams. Check. The previous post posed a question about ROAS. Check. Today’s post wraps the topic, showing the answer. Check out the question before flipping the [...]