EIGRP Enabler exercise 3 asked you to configure four routers, specifically to add the EIGRP network commands. If you’ve not seen these before, check out the Routing Protocol Enabler intro post. [...]
The goal is to get so good at your OSPF and EIGRP network commands that you get bored with all these exercises. There yet? If not, here’s another. As always with the EIGRP and OSPF Enabler [...]
This latest OSPF Enabler exercise asked you to configure four routers in a three-area design. As usual, the exercise asks for different styles of OSPFv2 network commands, for no other reason than [...]
In this latest OSPF Enabler exercise, you’ll configure a network of four routers with three areas. As always, the idea is simple: In one exercise, you’ll get to configure about 10 different [...]
This latest EIGRP Enabler exercise asked you to configure three routers, specifically to add the EIGRP network commands. This post lists the answers – simple enough.
Now for some more EIGRP work. Your job: read and react to a set of requirements to then choose how to configure about a dozen EIGRP network commands. Simple, useful, do it and move on to the next [...]
This latest OSPF Enabler exercise asked you to configure four routers in a two-area design. As usual, the exercise asks for different styles of OSPFv2 network commands, for no other reason than [...]
Time for another OSPF Enabler exercise. The idea is simple: In one exercise, you’ll get to configure about 10 different OSPFv2 network commands, with different requirements for each. Just getting [...]
The first EIGRP Enabler exercise asked you to configure four routers, specifically to add the EIGRP network commands. This post lists the answers – simple enough.
At some point, you need to master the network commands used with routing protocol configuration. This exercise gives you some practice on that one specific point, specific to EIGRP configuration. [...]