Back to homepage
Tag "Config Lab"
Config Lab: Switch Admin Config
Today’s topic: All lot of administrative settings on a switch, particularly access passwords, that you need to set up when you first install a switch. Enjoy! Want info about all of CiscoPress's products for the new Cisco certifications in 2020?
Config Lab: Switch Duplex and Speed
For this next lab, instead of just asking you what the IEEE auto-negotiation rules look like, the lab asks you to configure some switches in ways that affect auto-negotiation. But the lab gives you the end goal: the resulting speed
Config Lab: SSH Config
Today’s post gives you another brief config lab exercise, this time with SSH. Like the previous lab post, this one starts with a cleanly-wiped router config (except the hostname) to make that one router ready for SSH. As usual with
Config Lab: Telnet Config
Today’s post takes us from a cleanly wiped router config (except hostnames), to one router being ready for Telnet support. As usual, you can do the lab on paper or in a text editor in just a few minutes, or
Config Lab: CLI Miscellany 1
The CCNA certification includes many prominent features that need to be configured. VLANs. Trunking. Routing protocols. IPv4 addressing. IPv6 addressing. But there are also the occasional small topic or single command that might be forgotten. This lab examines a couple
Config Lab: Login Security 1
One of the first configuration items that become second nature is the configuration of basic password settings. But it is also easy to forget about the small differences in password security configuration once you get used to configuring your own
Config Lab: Switch IP 1
A layer 2 switch does not need an IP address or default gateway for its primary purpose of forwarding layer 2 Ethernet frames. However, the switch does need an IP address and a default gateway for layer 3 communication, such
Config Lab: Enabling SSH and Disabling Telnet
Many of us start out learning about the simplest Cisco security option: One password for all users to reach user mode, with no per-user login. By today’s standards, that security method is archaic. Today’s lab lets you upgrade from that
