A: WAN Basics

Wendell
By Wendell September 27, 2018 09:05

What happens over an Ethernet WAN link? What Data Link addresses appear in the frame that the routers forward over the WAN? What data link headers exist on the WAN link? What types of cabling must be used? The latest question asks about these kinds of details – answers below the fold.

The Answers:

B

 

Background: Ethernet WAN Links

Ethernet WAN links include a connection from each customer site to some service provider device, usually an Ethernet switch, as shown in Figure 2. Because the service provider keeps their gear in a different building than most of their customers, the Ethernet link between the customer and SP runs far longer than the 100-meter maximum for most copper-based Ethernet cabling.

Figure 2: Ethernet WAN Links with Fiber Cabling and the SP PoP

The link does use Ethernet as the Data Link protocol. As a result, the routers connected to the Ethernet WAN act much the same as they would if connected to a simple Ethernet crossover cable in a lab. In particular, they would use their own Ethernet MAC addresses when creating and forwarding frames, as shown in Figure 3.

Figure 3: Data Link Addresses PC1 Towards PC2

 

Why the Right Answer is Right

The single correct answer mentions that the links use fiber optic cabling. Some Ethernet standards define the use of Unshielded Twisted Pair (UTP) copper cabling, but those have a maximum distance of 100 meters. The link must use fiber optic cabling to meet the longer distance requirements.

 

Why the Wrong Answers are Wrong

One answer mentions the use of UTP copper cabling, which would be unrealistic. In theory, the customer might be within 100 meters of the Service Provider’s device in their PoP, but such a case would be rare.

One answer mentions the use of headers that include parts of the HDLC and Ethernet header; Ethernet WAN links do not use HDLC physical or data link standards at all.

Finally, one answer mentions the use of Ethernet MAC addresses, which is true. However, it mentions the PCs’ MAC addresses, used on the frame sent between the routers over the WAN. On that link, as shown earlier in Figure 3, the frame includes the two routers’ MAC addresses instead.

Q: WAN Basics
Q: TCP/IP Model Lingo
Wendell
By Wendell September 27, 2018 09:05
Write a comment

No Comments

No Comments Yet!

Let me tell You a sad story ! There are no comments yet, but You can be first one to comment this article.

Write a comment
View comments

Write a comment

Your e-mail address will not be published.
Required fields are marked*

Subscribe

Subscribe to our mailing list and get interesting stuff and updates to your email inbox.

Thank you for subscribing.

Something went wrong.

Search

Categories