Back to homepage

Chapter 19

Answers: RIPv2 Basics 2

Answers: RIPv2 Basics 2

🕔09:10, 14.Jun 2016

Once you have read through the book’s material for RIPv2, it should only take two or three good RIP labs to get comfortable with RIP configuration. This latest lab should help you with that bit of practice. You know the

Read Full Article
RIPv2 Basics 2

RIPv2 Basics 2

🕔09:05, 13.Jun 2016

RIP Version 2 (RIPv2) configuration requires the use of network command to indirectly enable RIP on router interfaces. This lab asks you to configure RIP by choosing the correct parameters for the RIPv2 network command, please consider a few other

Read Full Article
Answers: RIPv2 Options 1

Answers: RIPv2 Options 1

🕔09:10, 9.Jun 2016

Know how to limit the number of RIP routes to each destination? How to enable RIP on an interface – but to not send Update messages out that interface? How to make RIP not summarize routes for classful networks? The

Read Full Article
RIPv2 Options 1

RIPv2 Options 1

🕔09:05, 8.Jun 2016

It’s baaack… RIPv2 is back, and in the new ICND1 book per the new ICND1 100-105 exam topics announced May 2016. The book’s out now. RIP Version 2 (RIPv2) configuration requires a series of RIP network commands, but it also

Read Full Article
Answers: RIPv2 Basics 1

Answers: RIPv2 Basics 1

🕔09:10, 26.May 2016

For this lab, your job is to take a working IPv4 network that has no routing protocol yet and add the RIPv2 configuration. As usual, check out the lab requirements here and take your shot at the configuration. Then check

Read Full Article
RIPv2 Basics 1

RIPv2 Basics 1

🕔09:05, 25.May 2016

RIP Version 2 (RIPv2) configuration may be one of those topics that become obvious with a little practice, but it does require a little practice at least. Interestingly, you may have to think more about which routers do not need

Read Full Article
Answer to the “Which Route…” question

Answer to the “Which Route…” question

🕔08:05, 2.Apr 2015

Last post I posed a question related to how a router chooses among multiple routes to reach the same subnet, when the routes were learned from different sources. The literal answer is lited below the fold. I’ll post a related

Read Full Article
Choosing Between Three Routes to Same Subnet

Choosing Between Three Routes to Same Subnet

🕔09:05, 31.Mar 2015

Today’s question focuses on one router that has three different available routes to the same subnet (10.1.2.0/24). Which should it choose? Details below, and answer in a few days.

Read Full Article

Subscribe

Subscribe to our mailing list and get interesting stuff and updates to your email inbox.

Thank you for subscribing.

Something went wrong.

Search

Categories