Back to homepage

Chapter 18

Answer: Forwarding and Encapsulation

Answer: Forwarding and Encapsulation

🕔14:05, 22.Jan 2018

The #CCNA exam can pack a punch with what looks like a simple question, and this latest practice question is just such an example. The question asks about switch forwarding, but it combines packet encapsulation concepts. Get either wrong, and

Read Full Article
Answers: Layer 3 Switching 2

Answers: Layer 3 Switching 2

🕔09:10, 7.Sep 2016

This lab asks you to configure layer 3 switching. Along the way, you get a pretty good review of other LAN switching config basics as well. By Config Lab standards, this lab is long enough to forget what the lab

Read Full Article
Layer 3 Switching 2

Layer 3 Switching 2

🕔09:05, 5.Sep 2016

This next lab is one of the longer labs in this config lab series. The lab includes some simple tasks to configure 802.1Q trunking and to create VLANs. The big focus of the lab however is to enable layer 3

Read Full Article
Answers: Layer 3 Switching 1

Answers: Layer 3 Switching 1

🕔09:10, 20.Jul 2016

This lab asks you to configure layer 3 switching, a little trunking, and some VLANs. The lab is long enough to forget all the requirements before you finish, so I would suggest keeping the lab post open in a tab

Read Full Article
Layer 3 Switching 1

Layer 3 Switching 1

🕔09:05, 18.Jul 2016

This next lab asks you to enable layer 3 switching in a couple of distribution layer switches. This lab is pretty far reaching as well, asking for some VLAN trunking configuration and VLAN creation. Because it is such a comprehensive

Read Full Article
Answers: IPv4 Static Routes 1

Answers: IPv4 Static Routes 1

🕔09:10, 10.May 2016

The configuration for this latest lab is relatively simple. However, it definitely helps you solidify your understanding of IPv4 routing, and that is something you should definitely master along the way. As always, start by checking on the lab and

Read Full Article
IPv4 Static Routes 1

IPv4 Static Routes 1

🕔09:05, 9.May 2016

One of the best ways to learn IPv4 routing is to think hard about IPv4 static routes. Today’s lab gives you more of that with a typical config lab. It starts with a topology and with IPv4 addresses configured. Your

Read Full Article
Answers: ROAS Basics 1

Answers: ROAS Basics 1

🕔09:05, 12.Mar 2016

ROAS pulls many concepts together: IP addressing, VLANs, and VLAN trunking. Plus ROAS requires configuration on both a router and switch. This post lists the answers to the previous lab – check out the lab, and check here for the

Read Full Article
ROAS Basics 1

ROAS Basics 1

🕔09:05, 10.Mar 2016

#ROAS can be one of those topics that seemed to be clear when you read about it, but when you see a sample test question, you just sit there and scratch your head wondering exactly what to do. ROAS can

Read Full Article
Answers: IPv4 Static Routes 2

Answers: IPv4 Static Routes 2

🕔09:05, 9.Mar 2016

Want to know if you know IPv4 static routes well enough for the #CCNA exam? Practice til you know them so well that you can think the commands faster than you can type them. They’re a great learning tool for IPv4

Read Full Article

Subscribe

Subscribe to our mailing list and get interesting stuff and updates to your email inbox.

Thank you for subscribing.

Something went wrong.

Search

Categories