Back to homepage

Hands-on

Answers: SNMPv3 2

Answers: SNMPv3 2

🕔09:10, 23.Sep 2016

This lab asks you to use both authentication and privacy with SNMPv3, so it takes a few longer commands compared to some SNMP configurations. Focus on the basics, because there are many basics with SNMPv3 configuration. Especially for this lab,

Read Full Article
SNMPv3 2

SNMPv3 2

🕔09:05, 21.Sep 2016

In real life, you will probably configure SNMP correctly, use a similar configuration on all routers and switches, and then forget the details of how to configure all the other possible options. For the CCNA R&S exams, it helps to

Read Full Article
Answers: MLPPP 1

Answers: MLPPP 1

🕔09:10, 15.Sep 2016

Configuring multilink PPP (MLPPP) uses a large number of commands for a single feature. However, many of the commands are repetitive on several interfaces. The trick is to figure out which commands are repeated on both the physical and multilink

Read Full Article
Answers: IPv6 Global Unicast Addressing 1

Answers: IPv6 Global Unicast Addressing 1

🕔09:05, 14.Sep 2016 In this lab, you have to configure global unicast addresses, which does not require a lot of thinking. The harder part is the contrived part that lets you review some modified EUI-64 math, making you manipulate hexadecimal values to determine Read Full Article
Multilink PPP 1

Multilink PPP 1

🕔09:05, 13.Sep 2016

Multilink PPP (MLPPP) makes multiple parallel links act like one link from a layer 3 perspective. Then, when a router’s layer 3 routing decides to forward a layer 3 packet out the layer 3 MLPPP multilink interface, the router has

Read Full Article
IPv6 Global Unicast Addressing 1

IPv6 Global Unicast Addressing 1

🕔09:05, 12.Sep 2016 IPv6 addresses just take a little getting used to. This next lab gives you same reps with configuring Global Unicast addresses, while giving you a few mind-bending exercises to make you think about Link Local addresses and EUI-64. I would Read Full Article
Answers: IPv6 Standard ACL 1

Answers: IPv6 Standard ACL 1

🕔09:10, 9.Sep 2016

The previous lab exercise requires you to configure a standard IPv6 ACL. The address range matching should be pretty straightforward. You also need to choose where to put the ACL, and for which direction of flow for the packets. As

Read Full Article
Answers: Layer 3 Switching 2

Answers: Layer 3 Switching 2

🕔09:10, 7.Sep 2016 This lab asks you to configure layer 3 switching. Along the way, you get a pretty good review of other LAN switching config basics as well. By Config Lab standards, this lab is long enough to forget what the lab Read Full Article
IPv6 Standard ACL 1

IPv6 Standard ACL 1

🕔09:05, 7.Sep 2016

IPv6 ACLs – new to #CCNA with the 2016 exam revisions – include both standard and extended ACLs. However, IPv6 standard and extended ACLs have only subtle configuration differences. This lab helps you notice those differences with a lab that

Read Full Article
Layer 3 Switching 2

Layer 3 Switching 2

🕔09:05, 5.Sep 2016 This next lab is one of the longer labs in this config lab series. The lab includes some simple tasks to configure 802.1Q trunking and to create VLANs. The big focus of the lab however is to enable layer 3 Read Full Article

Subscribe

Subscribe to our mailing list and get interesting stuff and updates to your email inbox.

Thank you for subscribing.

Something went wrong.

Search

Categories